Standalone Digital Video Recorder Premium DVR 4, 8, 16 Channel Models User`s Manual MADE IN KOREA M4229RGDDT This docu
10 B Type –4 / 8 / 16 channel Series DVR
100 When user registered the account, the program will be automatically installed. 12.1.3 Site Registration Click “ ” icon on iPhone menu then
101 Enter ID/Password. Click “” to save the setting. 12.1.4 Connection On “” window, click one of the registered site and click “ ”.
102 Touch and drag upside on the center of the screen to zoom out. Touch and drag downside on the center of the screen to zoom in. Touch sides
10312.1.7 Uninstall Click the “” icon and hold for a while until the program icon shows x mark on the top-left side. Click the “” icon t
10412.2 Android Phone 12.2.1 System Requirements This Program is designed and applied only for Android OS based Smart phones. 12.2.2 Installati
105 Click “” then “ ” to start installation. The program will be automatically installed in user’s application menu. 12.2.3 Site Registrat
106 Enter Admin/Stream port value. Enter ID/Password. Click “ ” to save the setting. 12.2.4 Connection Click “” icon and select one o
107 Touch sides and corners of the screen to change the direction as user want. Touch right side of the screen to move right and left side to mov
108 Click “” icon then it will ask to delete the program. Click “” button to successfully uninstall the program. 12.3 Blackber
109 Select the “DVR viewer” which is offered from dvrdomain by free and start to install the program by clicking the icon. 12.3.3 Site Registrati
11 C Type –4 / 8 / 16 channel Series DVR
110 Click “Menu>Connect” to connect the site. If users want to change the channels, click “Menu” to select another camera. 12.3.5 PTZ Contr
111 (NOTE) Touch type Blackberry phone (Ex. Storm) user may control PTZ as the same way as Android Phone. 12.3.6 Disconnection When disconnect
112 Click “Next” button. Click accepting the license agreement, then click “Finish” button. Installation box will appear. Click [OK] to sta
113 (NOTE) Depending on mobile device, successful installation message may not appear. Click [OK] when license agreement message appear. Move
114 Fill in correct information. - Site Name : Insert the name of site. - IP/Domain : Insert the IP address or Domain name of the site. - ID : Input
115 Live display screen of the site will appear if it is successfully connected. Users are able to select a camera by clicking camera button. C
116Keyboard Controller Keyboard Controller CP1200A User`s Manual This document contains preliminary information and is subject to chang
11713. KEYBOARD CONTROLLER 13.1 Connection User may connect cameras and Keyboard through DVR in various ways. Below shows the major probable
11813.1.3 Configuration Diagram III Multiple system configuration (Multi Cameras, Multi DVRs) Please make sure to connect “Tx to Rx “or “Rx t
11913.3 Keyboard Configuration 13.4 Operation 13.4.1 DVR/PTZ Mode conversion Press System ID number (For example, ID: 001 press Num Pad ) wi
12 D Type –4 / 8 / 16 channel Series DVR
120the PIP channel. In case of 4 or 9 channel screen, it changes the screen to a next one in the sequence. - FREEZ: freeze a current image. - SETUP:
121Serial In (POS / ATM) Serial In (POS / ATM) User`s Manual This document contains preliminary information and is subject to change w
12214. SERIAL IN (POS/ATM) 14.1 Usage of Serial-In Function Enables to record/search/display all transactions on monitoring screen by connect
123 F Type Using RS-232: Connect RS-232 port to USB port at front/rear of DVR by using a converter. 14.4 Link 14.4.1 Link Setup Click “Setu
124 Select POS/ATM port by clicking ‘Serial In’ button. Assign the port to display/record channel by clicking a “Link Camera”. Select “Link Ala
125 (NOTE) This [Serial In] section does not show without additional Serial-in option. 14.5.1 Title Click “Title” item then virtual keyboard
126- Both: displays all the information on both Live and Playback mode. 14.5.4 Pattern Setting User can select the name of serial device if click
127 Input a certain repeated string to “Line Delimiter”. Decide the number of minimum characters in “MCPL” item to hide data under the design
128 Then tick the Auto box off in order to make the DVR recognizes the data between the Start and End patterns. Finally, test again and adjus
13 E Type –4 / 8 / 16 channel Series DVR
14 F Type –4 / 8 / 16 channel Series DVR
15 G Type –4 channel Series DVR
162. Installation 2.1 Hard disk and DVD-RW Installation 2.1.1 SATA Port A Type - Main substrate of this DVR has one SATA port: it is indicated as
172.1.2 Internal SATA Storage (E, F and G Type) These series DVRs have 5 Internal SATA Ports: The picture below shows internal ports 1-4 SATA Port
182.1.5 Maximum HDD Capacity Each model has a different HDD capacity recognition. Below table shows the recommended maximum HDD capacity for each
19 If user wishes to hear audio via HDMI cable, check the box HD Audio Output Click the box below to select resolution. - User can select the re
2FCC Compliance Statement Notice to Users: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant
202.2.11 Power Supply connections A Type : Plug the power supply adapter (DC 12V, 3.33A) which include in this product to ’DC12V’ connector and pl
213. Input Device and Screen Icons 3.1 Key and LEDs B and D Type KEYS PTZ KEY Operating mode Setup mode ▲, ▼, ◄, ► • Control Pan/Tilt rotati
22 C, E, F and G Type KEYS PTZ KEY Operating mode Setup mode ▲, ▼, ◄, ► • Control Pan/Tilt rotation of up/down/left/right in PTZ mode •Up/Down/Le
233.2 Camera Select Keys for 16 Channel DVR B and D Type Below shows how to select camera channel for 4 channel DVR - Select Camera No. 1~4: pre
24B and D Type 4 Channel DVR 8 Channel DVR 16 Channel DVR C, E, F and G Type 4 Channel DVR 8 Channel DVR 16 Channel DVR 3.4 Using a Remote Contr
253.5 Using a Mouse Mouse provides an easier access to adjustment. Refer to below for proper use. Left mouse button functions the same as Enter (
263.6 Screen Icon Icon Description Icon Description Continuous recording mode In Audio recording Event recording mode (Alarm In/Motion) 4 CMS a
274. Setup 4.1 Login / Logout At the default setting of DVR, user has to input the password to enter the set up menu. Please press SETUP key to
284.2 SYSTEM 4.2.1 Information Please click ( ) SYSTEM>Information and the following screen will appear. Site Description Decide on a name
29 Import: Copy the Menu setup stored in USB memory stick into DVR. Please plug in the memory stick and then click ( ) Import. Export: Store the
3Cautions This product has multiple-rated voltages (110V and 220V). See installation instructions before connecting to the power supply. This pr
30 User shall designate the total recording days from 1 day to 30 days and unlimited. User may set for beeping or notifying messages that notify
31 Please click ( ) SYSTEM>Admin and the following screen will appear. Date This menu will allow user to adjust the settings. Please fol
32 Set time indication format. Please click ( ) Time Format frame to select a format from the list. When user complete Date/Time input, please
33 Using E-SATA port will allow users to connect up to maximum 12 HDD +1 DVD-RW. When user installs full storage device and DVD-RW including two e
34 Click ( ) ▲, ▼ direction buttons on the right-hand side of HDD Damage frame to set the permissible level of HDD damage (%). HDD is a very cru
35 Please click ( ) New User and the following screen will appear. Click ( ) the keyboard icon on the right-hand side of User Name frame and
36 This is a screen for password resetting. Input password by clicking the keyboard icon on the right-hand side of the frame. Use key if wis
37- Execute Clear All Data in SYSTEM>Information>Record and choose ‘OK’ on the popup dialogue box. Please note that all normal recorded video d
38 OSD Margin The OSD Margin menu will allow user to adjust the position of OSD (letters) on the monitor. Use it when some of letters are dropped o
39 Adjust interval for ‘X9 Split Screen sequencing’. Check check box next to the camera that wish to include in sequencing. Any camera with unch
411. Objects and Liquids Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out
40 The Multi Spot menu will allow user to adjust channel sequencing interval of Spot monitor. Adjust interval for ‘Full screen sequencing’. C
41G Type Users are able to set its video output resolution from 1024x768 to 1920x1080 If user wishes to hear audio via HDMI cable, check the box
42 Network Type Please click ( ) Network Type. When you click ( ) the button, it changes alternately to Static (fixed IP) and DHCP (floating IP
43varies every time when user access. The best alternative is DDNS (Dynamic Domain Naming System) which uses name (domain name) instead of IP address
44CAUTION CHANGES BEING MADE ARE APPLIED AFTER COMPLETE SETUP TO EXIT. CAUTION ONCE PORT NUMBERS ARE CHANGED, IT MUST BE CHANGED THE PORT NUMB
45 If a check box is checked on Covert column, a video is recorded but is not displayed on the monitor. Click ( ) each frame on PTZ column to
46 The Alarm In menu will allow user to give title and to select the type of Alarm input. Click ( ) the keyboard icon on the right-hand side of
474.5 RECORD Please click ( ) RECORD and the following screen will appear. 4.5.1 Setting A, B, C, D, E and F Type Please click ( ) RECORD>
48NTSC(PAL) 360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 4 Channel DVR 120 (100) 120 (100) 120 (100) 8 Channel DVR 240 (200) 240 (200)
498 Channel DVR 240 (200) 240 (200) 240 (200) 16 Channel DVR 480 (400) 480 (400) 480 (400) Click ( ) each frame on Quality column to select
5The List of Configuration DVR Set A Type : 4 / 8 / 16CH B and D Type : 4 / 8 / 16CH C, E, F and G Type : 4 / 8 / 16CH CD (CMS Software/Manua
50 There are three kinds of recording mode. - Continuous: record continuously. - Event: record only when Sensor or Motion calls. - Emergency: recor
514 Channel DVR 120(100) 120(100) 120(100) 120(100) 120(100) Click ( ) each frame on Quality column to select recording quality of a correspondin
52 When the HD-SDI input changed manually, DVR will start restart to apply changed resolution. CAUTION ALTHOUGH USERS TURN ITS SYSTEM SETTING TO
53 Motion / Continuous Motion / PreAlarm Motion / Alarm In Motion / Alarm In / Continuous Motion / Alarm In / PreAlarm Choose ‘OK’ to co
5416 Channel DVR 480 (400) 240 (200) 120 (100) F Type NTSC(PAL) 360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 8 Channel DVR 240 (200) 2
55 The Motion Detection menu will allow user to set Motion detection alarm. Press SETUP key (or right mouse button) and the SETUP menu will appea
56 The LINK menu will allow user to set recording modes of all kinds of alarms (Sensor, Motion Event, Video loss, System Event, etc.), alarm output
57 Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for notification. Link Noti
584.6.4 System Event Please click ( ) LINK>System Event and the following screen will appear. Select recording cameras and alarm outputs whi
595. OPERATION INSTRUCTION 5.1 Viewing 5.1.1 First Image Power on DVR and the following live video will appear, while viewing and recording at the
6Operation Precautions Power Off Do not turn DVR off, or plug off the power adapter while DVR is in operation (record/playback). Otherwise, it m
605.1.2 View Format The available view formats when the Main Monitor is in viewing mode include Full Screen, Split Screen, Channel Sequencing Scree
61 In Pan/Tilt mode, the icon is displayed on the bottom of the screen. Following is the key usage found in Pan/Tilt mode. Key Function ▲, ▼,
62items. - Since these functions make use of a memory function of the camera itself, user should set them in Camera OSD. - Once user completes the se
63 There are three ways to search video, i.e., by date/time and by calendar. - Date/Time Search: search by inputting date/time. - Calendar Search:
64③ Click ( ) the box on the time indication bar to select the search time. The selected time zone will be focused in different color. ④ Click
65 There are three ways to search video, i.e., by date/time and by calendar. - Date/Time Search: search by inputting date/time. - Calendar Search:
66Go to End I • Go to end of recorded data Press SEARCH key to stop playing back video. 5.4 One-touch Playback Press the PLAY/PAUSE key or
67Archive Fail message will pop up. In this case, user must try again. (NOTE) PLEASE DO NOT USE JPEG FORMAT SELECTING WHILE ARCHIVING IN LIVE MOD
68mode. : Displayed channel on Spot monitor 2 can be changed by clicking the wanted channel. Sequence stops at “SP2” mode. : Displayed channel on
69(NOTE) THIS FUNCTION IS ENABLED ONLY WHEN LIVE MODE AND 4 SPLIT SCREEN MODE OR HIGHER. (NOTE) ONLY 4 ALARM CONTROLS ARE AVAILABLE FOR TYPE B
7Table of Contents Server 1. PRODUCT FEATURES ...9 1.1 Unpacking ...
70Intuitive CMS CMS (Central Monitoring Station) User`s Manual This document contains preliminary information and is subject to change
716. PROGRAM INSTALLATIONS 6.1 System Recommendations Power on DVR and the following live video will appear, while viewing and recording at the sam
72⑥ When the following screen appears, select folder and click Next. ⑦ When the following screen appears, click Install. ⑧ When the following sc
737. FUNCTION AND INSTRUCTIONS Below lists are functions of the program. ICON ICON NAME WATCH MODE SEARCH MODE REMARKS System Log DVR Sy
748. WATCH MODE 8.1 LOGIN Screen When user login CMS, the following screen will appear. This screen is of Watch mode. Because it is not connecte
75 Save Option: allow user to select Drive(C, D) and folder to save data. Choose ‘OK’ to confirm the setting. 8.2.2 Remote Site This menu is f
76 - Click “Scan DVR” button then IP address of DVR will be listed which is currently connected with PC in the network. - Select the IP address and c
778.3 Live Video 8.3.1 Network Connection As the setup is completed, user should connect CMS to DVR over Network. Please click in REMOTE DVR on
781 Tool Bar 2 Watch Mode 3 Date/Time LED 4 Site Tree (DVR and Channels) 5 Color Control Bar 6 Instant Record Button 7 System Log 8 Alarm Out Chan
79(scaled to fit the screen). To cancel, please press the right mouse button. E Map: load and close E Map image program. Mouse Double Click: I
88.2.1 System Setup...74 8.2.2 Remote Site ...
80 8.3.7 Alarm Out This is for operating Alarm Out of a selected DVR from a remote distance. Click a channel number and Alarm Out of the corresp
81 ③ Preset Control button Click on Preset Control button and the following screen will appear. Please input Title and Preset Number. Whe
821 CMS connections (up to 4) 2 Camera connections and operating status 3 HDD connection and its operating status 4 Recording status 5 Motion rec
83 Above the maximum number of cameras allowed. 8.5.6 Alarm Out Connection and Operating Status Camera is in normal operation. Recordin
849. SEARCH MODE 9.1 Search Screen This menu is for playing back recorded data. Click on REMOTE SEARCH button in Watch mode and the following S
859.2 Remote Search The REMOTE SEARCH button allows user to playback recorded video of DVR. Select Date - In Calendar, dates with recorded dat
869.4 Event Search The REMOTE SEARCH button allows user to search event recorded data of DVR. ① Designate Event Search start time. ② Designat
879.5.2 Print This is for printing a selected image (within the red outline). Click IMAGE PRINT button and the following screen will appear.
889.5.4 Archive This is to back up the DVR’s moving image data to EXE file in PC(CMS). Work only in playback mode. Press STOP button first to
8910. Others 10.1 Viewer The Format of archive file is .exe(executable file). Please double click on the icon to execute the program. PL
91. Product Features 1.1 Unpacking This equipment is an electronic appliance, so it should be handled with special care. After unpacking, please
90 Please click on the icon to load the image file. To create an icon, please select the icon you want and click it at a desired pos
9110.3 Watermark Check System Mouse double click WCS.exe program in the CMS program folder (Default: C:\Program Files\CMS\WCS.exe). To open
9210.5 EXE to AVI Converter Users are able to convert Archived file(EXE format) to AVI format. Users will be required a converting codec betw
93CMS Web Client CMS Web Client User`s Manual This document contains preliminary information and is subject to change without notice.
9411. CMS WEB CLIENT 11.1 Setup and Login MS Explorer web browser is required for installation and using this program. Open a browser and t
9511.2 Live Display After Login, following screen will appear. The screen contains following features: ① Display current live video ② Setti
9611.3 Playback Screen Click [Playback] then following screen will appear. The screen contains following features: ① Searched playback vid
97CMS Mobile Viewer CMS Mobile Viewer User`s Manual This document contains preliminary information and is subject to change without
9812. CMS MOBILE VIEWER 12.1 iPhone Mobile 12.1.1 System Requirements There are no other requirements to run this program because it is spec
99 Select “” program which is offered from dvrdomain by free. When user clicks a “” button, it will be turned to “ ” Click “” to star
Comments to this Manuals